Mavic Cosmic Carbone 40 Clincher Wheelset

The best combination of reliability and lightweight for the most versatile aero wheelset. Thanks to the exclusive TgMAX technology, Mavic’s carbon clincher solution is the most reliable and dynamic clincher wheelset ever.

KEY BENEFITS:

THE PERFECT BLEND OF LIGHTWEIGHT AND AERODYNAMICS

• 40 mm wind tunnel optimized rim profile
• Extralight carbon rims fitted with 190 grams Yksion Pro clincher tyre
• Carbon/alloy hubs with aero flanges

EFFECTIVE CARBON CLINCHER COMPATIBILITY AND SUPERIOR BRAKING PERFORMANCE

• Carbon structure, enhanced by the exclusive TgMAX technology
• Aluminum spine to hold brake and air pressure
• No holes, no weak point

HIGH STIFFNESS AND EASY MAINTENANCE

• Fore drilling
• Integrated nipples
• QRM+ hubs

WEIGHT

• Tyre 700x23: 190 grams
• Pair without tyre: 1545 grams
• Front without tyre: 670 grams
• Rear without tyre: 875 grams

KEY TECHNOLOGIES:

TGMAX

• Maximum Glass Transition Temperature
• TgMAX technology consists in laying up several types of high technology resins, then fixing them using a proprietary heat treatment process to achieve the highest possible resistance to braking heat.

GRIPLINK

• Grip and control
• A front tyre, whether a clincher or a tubular, must fully liberate the wheel’s ability to hold the ground and control the bike. Therefore, GripLink tyres are optimized for front use, by offering a superior grip and extra puncture protection.

POWERLINK

• Low rolling resistance
• A rear tyre, whether a clincher or a tubular, must fully liberate the wheel’s ability to transfer power and generate speed. Therefore, PowerLink tyres are optimized for rear wheel use, by minimizing the rolling resistance.

FTS-L

• Force Transfer System Light
• Reinforcement of key transmission components: the contact area between the pawl and the hub body is reinforced by 2 stainless steel inserts, which allows the use of a 100% aluminum hub body.

FORE

• Stiffer and stronger
• Instead of being drilled, the lower rim bridge is pushed up on the inside, then threaded to enable the spoke nipples to be directly screwed in it, leaving the upper rim bridge intact.

QRM+

• Qualité de Roulements Mavic +
• Our most demanding level. Those cartridge bearings are of course double sealed with C3 internal clearance, and toped with a micro-adjustability system.

MAXTAL

• Light and strong
• Exclusive to Mavic, this specific aluminum alloy offers a higher strength to weight ratio than conventional 6106 alloy.