Wolf Tooth Goatlink 11 Speed Rear Derailleur Adapter
小売価格: ¥5,483
¥2,385
割引: ¥3,098
売り切れ
The Wolf Tooth Goatlink derailleur hanger extension offsets the position of your 11-speed Shimano rear derailleur, improving long-term shifting performance and making it possible to run larger range cassettes in an optimal position.
If you’re looking to climb the steepest climbs on a 1x set up, this is a hassle-free way to do so.
The GoatLink grew out of a desire within Wolf Tooth's team to run 11-speed Shimano derailleurs and shifters with SRAM 10-42t XD cassettes without compromising shifting performance.
When used with a 10-42t cassette, the GoatLink 11 re-positions SLX M7000, XT M8000 and XTR M9000 rear derailleurs such that free chain length between the cassette and the top derailleur pulley is within 1% of what Shimano intended while cassette tooth engagement in the smallest cog is improved by 27%.
Compatibility
- The GoatLink 11 is compatible with SLX M700, XT M8000 and XTR M9000 series 11-speed Shimano rear derailleurs.
- The GoatLink 11 mounts only to standard derailleur hangers.
- Double chainrings (2x) is supported and requires a long cage (SGS) rear derailleur with no more than a 12t difference in front chainrings (with an 11-46t cassette).
- Triple chainrings are not supported.
- Direct Mount native frames and SRAM derailleurs are not supported.
*Due to variations in derailleur hanger geometry, chainstay length, chainring size, B-screw adjustment, and suspension configuration, individual results will vary slightly.
GoatLink Installation Instructions
- Goatlink
- Shimano
- Wolf Tooth
配送はどのぐらいかかりますか。
注文するときアイテムの在庫状況を確認してください。このアイテムは: 売り切れ
アイテムが急送されたことをどう知りますか。
アイテムの急送を確認するメールを送ります。
私のアカウントで ご注文の状態や個別なアイテムの状態が確認できます。
配送の遅延を知らせる前にご注文の急送から15営業日を許してください。
アイテムは届けていない場合、お隣人が小包を預かっているか確認したらいいです。または現地の郵便仕分けデポーか配送デポーに問い合わせて、小包がそちらにお拾いを待っていることを確認したらいいです。
アイテムに満足しない場合
返品ポリシーは こちら
現在は口コミがありません
レビューを書くと、14,000円もらえるチャンスです!